mda_envelope
mda Envelope
mda Envelope is an envelope follower and VCA.
CAUTION: This plug is intended for advanced users. It can output high levels of DC which may damage speakers and other equipment.
Normally two Envelope plug-ins will be used with the first set to FLAT/ENV to separate the signal waveform and envelope and the second set to L x |R| to recombine them. Effects applied to either the left or right channel between these plug-ins can be used to process the waveform and envelope separately, for example delaying the envelope relative to the waveform, or applying waveshaping with a constant “drive” level.
Note that in L x |R| mode with a mono input, the plug-in acts as a 2:1 expander.
Parameters
Output | L x R: multiplies left channel signal by right channel level |
---|---|
IN/ENV: left channel is not processed, right output is a DC signal derived from the input signal level | |
FLAT/ENV: as IN/ENV but the left channel is processed to remove level variations | |
Attack | Attack time |
Release | Release time |
Gain | Level trim |
mda_envelope.txt · Last modified: 2023/05/08 18:59 by 127.0.0.1